• Under Body Tipping Cylinders

    Tipping Capacity: 1- 25 tonnes
    Working pressure ≤ 230 bar

    Enquiry
  • Tilt Sensor

    1. MEMS Technology
    2. AIS-004 (Part 3) certified for EMI/EMC by ARAI
    3. IP65 certified
    Enquiry
  • Cabin/Air Control Valves

    Wipro’s Cabin/Air Control Valves are used for direction control and the Power Take-Off (PTO) in tippers. The cabin control valve comes with a joy stick to control tipping, lowering, neutral, and PTO functions.

    Enquiry
  • Direction Control Valves

    Wipro’s Direction Control Valves (DCVs) come with different flow capacities and actuation – manual, pneumatic and solenoid.

    Enquiry
  • Axial Piston Pumps

    • Range: 21 – 80cc
    • Volumetric Efficiency: 95%
    Enquiry
  • Gear Pumps

    • Range: 60 – 100 cc
    • Working pressure ≤ 280 Bar
    Enquiry
  • Cover Type (DFC) Cylinder

    The Cover Type Cylinder requires mounting on fixed (bottom) and floating (top) trunnions. The cylinders are sturdier and best suited for both short and long chassis tippers.

    Enquiry
  • Diamond Front End Telescopic Cylinder

    The design of the Diamond Front End Telescopic Cylinder has several features that deliver better performance, increase sturdiness and extend the cylinder’s life.

    Enquiry
  • Lubricating Pastes

    It is precisely in the marginal areas of grease lubrication where pastes exhibit their exceptional efficiency.

    Enquiry
  • Concrete release agents

    High-quality concrete release agents are indispensable where the quality of a concrete surface is concerned.

    Enquiry
  • Application equipment

    SYSTEM REINER – the versatile system for safe and clean lubrication of your machines

    Enquiry
  • Greases for Machine Tools

    • Spindle bearings
    • Chucks
    • Transmissions
    Enquiry
  • Greases in Spray Cans or Rattle Cans

    DUOTAC ZAHNRADSPRAY – Dry, tenacious lubricating film. Solid lubricating film up to +300 °C; Bitumen-free special lubricant with graphite

    Enquiry
  • Assembly Pastes

    RENOLIT AS – Lubricating and sealing grease

    Enquiry
  • Rapidly Biodegradable Lubricants

    FUCHS was one of the first companies to launch biodegradable lubricants in the 1970s, and since then FUCHS has invested heavily in the research and development of these lubricants.

    Enquiry
  • Open Gear Lubricants

    The product portfolio encompasses both grease-based, graphited lubricants, high-viscosity fluids free from solid lubricants and semi-fluids containing solid lubricants.

    Enquiry
  • Dry Coating

    In many instances where dry lubrication is required, solid film lubricants are the best choice. The solid film lubricant coating has proven its worth millions of times.

    Enquiry
  • Fixed pumps

    A2FO, fixed displacement, open circuit, high pressure, size: 10 cm³

    Enquiry
  • Under Pallet Carrier 1.5t

    Models: Under Pallet Carrier UPC

    Enquiry
  • Tow tractor 4.0t

    Models:EZS C40

    Enquiry
  • Tow tractor 28.0t

    Models: EZS 7280

    Enquiry
  • Tow tractor 7.0 – 10.0t

    Models: EZS 570-5100

    Enquiry
  • Tow tractor 5.0t

    Models: EZS 350

    Enquiry
  • Tow tractor 3.0t

    Models: EZS 130

    Enquiry
  • Tow tractor 1.0t

    Models: EZS 010

    Enquiry
  • Batteries/charging technology

    A key priority of our products is the efficient use of energy. We are the only supplier that develops and manufactures our own vehicles, control units, as well as software, batteries and charging technology. The whole package is an integrated system from a single source – to your benefit.

    Enquiry
  • Filtration

    Using HYDAC’s Handheld Filter System and Fluid Control Unit, for complete system fluid conditioning monitoring (FCM), resulted in the reduction of unscheduled maintenance work, increasing both machine availability and component life.

    Enquiry
  • Electronics & Controls

    It slows product release time and increases machine cost. In addition, complying with strict safety regulations, per machine and/or model, further extends the programming timeline.

    Enquiry
  • Accessories

    The customer was fabricating custom straps to mount the reservoir and battery on their concrete riding trowel.

    Enquiry
  • Cooling Space Solution

    EPA restrictions require additional cooling – engines need higher temperatures to emit lower NoX levels.

    Enquiry
  • Fuel Filtration

    The unit was able to be used to filter fuel upon delivery. The compact unit had the added benefit of being easy to design into enclosures.

    Enquiry
  • Accumulators & Cylinders

    HYDAC offers a full range of mill, weld, and hybrid cylinder solutions for both mobile and industrial applications

    Enquiry
  • Two Stage Oil-free Rotary Screw Compressors Dx-series 200-355kw

    DX200 to DX355 Series
    Pressure: 4
    to 10 bar
    Flow: 11.4
    to 53.4m3/min
    200
    to 355kW

    Enquiry
  • Oil Free Scroll Air Compressors

    S04 to S15D Scroll
    Pressure: 8 
    to 10 bar
    Flow: 0.35 
    to 1.77m3/min
    to 15kW

    Enquiry
  • Water Injected Oil Free Rotary Screw Compressors

    D15H (RS) to D110H (RS)
    Pressure: 5 
    to 10 bar
    Flow: 0.32 to 18.55m3/min
    15 
    to 110kW

    Enquiry
  • Two stage oil free rotary screw air compressors

    D75 (RS) to D160 (RS)
    Pressure: 4 
    to 10 bar
    Flow: 8.89 
    to 23.52m3/min
    75 
    to 160kW

    Enquiry
  • Two Stage Oil-Free Rotary Screw Compressors D-Series 37-75kW

    D37 to D75 Series
    Pressure: 7
    to 10 bar
    Flow: 6
    to 12.7m3/min
    37
    to 75kW

    Enquiry
  • Ultima Oil Free Screw Air Compressors

    ULTIMA U75 to U160
    Pressure: 4 to 10 bar
    Flow: 6.7 23m3/min
    75 
    to 160kW

    Enquiry
  • 160 – 250 kW

    L160 to L290
    Flow: 6 to 47 m³/min
    Pressure: 5 to 13 bar
    Fixed & Variable Speed
    This exciting new range of gear and direct drive compressors delivers up to 12% more compressed air with the same kW motor.

    Enquiry
  • 30 – 45 kW

    L30 to L45
    Flow: 1.33 to 8.67 m³/min
    Pressure: 5 to 13 bar
    Fixed & Variable Speed
    Configurable to your unique requirements and designed with a larger airend for delivering cutting edge efficiency.

    Enquiry
  • 2 – 7.5 kW

    L02 to L06
    Flow: 0.18 to 0.95 m³/min
    Pressure: 10 bar
    Low-noise, fixed speed compressor.
    Available as stand alone, receiver mounted and Airstation versions.

    Enquiry
  • 7 – 22 kW

    L07 to L22
    Flow: 0.41 to 3.65 m³/min
    Pressure: 7.5 to 13 bar
    Fixed & Variable Speed
    Fully integrated design with high efficiency airends suitable for most advanced applications.

    Enquiry
  • 22 – 30 kW

    L23 to L29
    Flow: 0.92 to 5.52 m³/min
    Pressure: 7.5 to 13 bar
    Fixed & Variable Speed
    High output airend screws, highly efficient IE3 electric motor, integrated oil filter and regulation valve offer highest levels of quality.

    Enquiry
  • Industrial Rotary Vane Solutions

    The Hydrovane series rotary sliding vane compressors are reliable, versatile, powerful and cost effective.

    Enquiry
  • Quick Release Coupler

    One way automatic shut off valve in the socket.
    wide variety provides best choice according to application.

    Enquiry
  • PU Hose and Reels

    Oil resistance
    Light Weight
    Superior heat and cold resistance

    Enquiry
  • Air Preparation Unit

    Air treatment for end user point
    Pneumatic tools
    compressed air supplied
    automation

    Enquiry
  • Air Blow Gun

    Wide range of products: PU Tubes, FRL, Air blow Gun, Quick release couplers; breaded air hose, hose reel etc.

    Enquiry
  • AIRPipe Low pressure accessories for compressed air

    Wide range of products: PU Tubes, FRL, Air blow Gun, Quick release couplers; breaded air hose, hose reel etc.

    Enquiry
  • Aquapipe

    Aqua Pipe® is a proven economical and viable alternative to issues related to water mains where, in the past, the only solution was to dig and replace.

    Enquiry
  • Airpipe

    AIRpipe system is designed to improve user’s air quality, change environment and reduce cost of fluid transmission and prolong its lifespan.

    Enquiry
  • No products found
  • Winches

    Built of rugged cast iron and steel construction, Ingersoll Rand winches are extremely durable and reliable.

    Enquiry
  • Hoists

    Bring outstanding control, reliability, long life and safety to your load handling operations with Ingersoll Rand manual and powered hoists.

    Enquiry
  • BOP Handling Systems

    Designed and built in ISO9001 certified factories, they come with manufacturer test certificates and meet stringent specifications.

    Enquiry
  • Cordless Tools

    Specifically designed for vehicle services, industrial maintenance and manufacturing applications, our engineers know that a cordless tool has to do the job, do it fast and do it every time.

    Enquiry
  • Air Starters

    ir starters are flexible, efficient alternatives to electric sources. They create sheer power from the natural environment, and are perfect for a wide range of industrial, marine and automotive applications.

    Enquiry
  • Impact Wrenches

    Our impact wrenches are designed with durability in mind, from the vanes turning the motor to the hammer frames and anvils.

    Enquiry
  • Oil-Flooded Air Compressors

    Ingersoll Rand oil-flooded rotary screw air compressors offer businesses the very best combination of time-proven designs and technologies plus new, advanced features that ensure the highest levels of reliability, efficiency, and productivity available

    Enquiry
  • Air Compressor Dryer

    Used to remove moisture that can cause damage to your compressed air system

    Enquiry
  • Reciprocating Air Compressors

    Easy access to the pump components in our reciprocating compressors allows for routine maintenance and replacement of parts like the individually cast cylinders, the piston wear-sleeves, and the 15,000-hour bearings.

    Enquiry
  • No products found
    No products found
  • Motors & Gearboxes

    Rexroth´s comprehensive range of motors convinces with highest performance and an unique diversity of types, designs and capacities.Categorises into various parts visit here for more products.

    Enquiry
  • Drives

    Bosch Rexroth has developed the most compact modular drive system in the world for its customers with ctrlX DRIVE. Categorises into various parts visit here for more products.

    Enquiry
  • Safety

    Safety controls Certified according to IEC 61508 (SIL3) and EN ISO 13849-1 (Cat. 4, PL e). Scalable for central and decentral automation structures. Categorises into various parts visit here for more products.

    Enquiry
  • I/O

    I/O systems from Rexroth provides you with maximum flexibility for cost-effective implementation of your custom machine concepts. Categorises into various parts visit here for more products.

    Enquiry
  • Automation Controls

    The wide range of scalable embedded control hardware flexibly extends centralized and decentralized automation topologies. Categorises into various parts visit here for more products.

    Enquiry
  • Smart MechatroniX

    Smart MechatroniX stands for “Plug & Produce, Perform, Proceed”. It used in factory automation and paving your way to the Factory of the Future. Categorises into various parts visit here for more products.

    Enquiry
  • Electromechanical Cylinders

    Electromechanical cylinders now also with the option lifetime lubrication. Hygienic, variable, energy efficient, lubricated for life (optionally).Categorises into various parts visit here for more products.

    Enquiry
  • Multi Axis Systems

    Ready-to-install, scalable positioning and handling solutions from proven and perfectly matched components, motors and servo drive.Categorises into various parts visit here for more products.

    Enquiry
  • Linear Axes

    Linear motion systems are precise, ready-to-install guide and drive systems with high performance features in compact dimensions. Categorises into various parts visit here for more products.

    Enquiry
  • No products found
    No products found
  • System Solutions for Salt/Grit Spreaders

    The Salt Spreader system includes highly adaptable solutions for all challenges in the area of winter road maintenance.

    Enquiry
  • Electrohydraulic Linear Drives

    Closed servo-hydraulic axes combine the advantages of an electric servo drive with those of a robust, powerful and efficient hydraulic transmission.

    Enquiry
  • Efficient System Solutions for the Electrification of Mobile Machines

    In order to achieve high cost-effectiveness, longer service life as well as reduced energy consumption, efficient, coordinated hydraulic components are of crucial importance.

    Enquiry
  • Stabiliser Cylinders

    Stabiliser cylinders are safety-related components that are subjected to enormous loads.

    Enquiry
  • Swing-axle Cylinders

    Swing-axle cylinders are used for locking the swing axle in mobile construction machines.

    Enquiry
  • Boom Cylinders

    Boom cylinders are used for moving the boom and stick. These cylinders are the largest in our product range.

    Enquiry
  • Digital Electronic Control Systems

    Modern vehicles and mobile machines require powerful control electronics, to cope with all kinds of demands.

    Enquiry
  • Analog Electronic Control Systems

    With one power output and two ON / OFF outputs

    Enquiry
  • Application Unit Series Wuxi

    This power unit is designed exclusively for small tipper, consisting of high pressure gear pump, DC motor, multi-functional manifold, valves and tank, etc.

    Enquiry
  • Hydraulic Power Packs, Series UP

    hese units feature a high degree of accuracy and have a wide application range.

    Enquiry
  • Electro-Pumps ET

    Bucher Hydraulics electro-pumps series ET are equipped with modern external gear pumps – AP05, AP100 and AP212 series together with efficient DC or AC electro-motors.

    Enquiry
  • Directional Spool Valves

    Solo units are compact monoblock valves with pipe-threaded ports, and can be directly installed into a hydraulic system.

    Enquiry
  • No products found
  • IKRON filters

    Ikron “Fluid Filtration” from Casappa “Fluid Power Design” Accurate filtration extends the life of all components and improves the efficiency of the hydraulic system.

    Enquiry
  • Magnum [HDD]

    Displacements from 17.28 to 125.63 cm³ / rev available in groups 30 and 35. Peak pressures up to 320 bar.

    Enquiry
  • Polaris [PLD]

    Displacements from 2.14 to 33.03 cm³ / rev available in groups 10 and 20. Peak pressures up to 280 bar.

    Enquiry
  • DVT [TVP]

    The extremely compact structure allows direct mounting on power take-offs.

    Enquiry
  • ePUMP – MVPE

    – MVP piston pump
    – Angular sensor
    – Electronic pressure compensator
    – Electronic control unit

    Enquiry
  • MVP – MVPD – MVPR

    Variable displacement axial piston pumps with swash plate ideal for applications in the mobile sector in open circuit.

    Enquiry
  • Plata [LVP]

    Variable displacement axial piston pumps, swashplate type.

    Enquiry
  • Magnum [HD]

    Three-piece cast iron construction gear pumps and motors.

    Enquiry
  • Formula [FP]

    Gear pumps with two-piece cast iron construction.

    Enquiry
  • Kappa [K]

    Two-piece cast iron construction gear pumps and motors.
    KAPPA
    KAPPA Compact
    KAPPA 40 Plus-Heavy duty applications

    Enquiry
  • Polaris [PH]

    Gear pumps and motors built in three pieces with cast iron body.

    Enquiry
  • Aluminum body gear pumps and motors

    Gear pumps and motors built in three pieces with an extruded body in high resistance aluminum alloy.

    Enquiry
  • AVENTICS™ Series KPZ Compact cylinders

    It is a compact cylinders based on the widely used standard NFE 49 004. It offer a wide variety of variants and are suitable for a multitude of applications thanks to their sizing.

    Enquiry
  • AVENTICS™ Series ITS Tie rod cylinders (ISO 15552)

    The AVENTICS Series ITS (ISO 15552) cylinders are often chosen when extremely large loads need to be moved efficiently and under control with the familiar ease of operation.

    Enquiry
  • AVENTICS™ Series PRA Profile cylinders (ISO 15552)

    The AVENTICS Series PRA (ISO 15552) cylinders have a compact design profile with integrated sensor slots.

    Enquiry
  • Numatics™ Series FE Feed Escapement

    The Numatics Series FE feed escapement device incorporates two double-acting cylinders that are cross-ported and internally sequenced for smooth functioning parts regulation.

    Enquiry
  • AVENTICS ED07 Dynamic Direct Acting Pressure Regulator

    The AVENTICS ED07 direct acting pressure regulator offers proportional pressurization and the exhaust valves are controlled seperately to deliver dynamic control for the most demanding applications.

    Enquiry
  • AVENTICS ED02 Direct Acting Pressure Control Valve

    The AVENTICS ED02 direct-acting pressure control valve ensures sensitive pressure control by combining digital control electronics with innovative proportional technology.

    Enquiry
  • AVENTICS™ Series 521 Mini-Spool Valves

    The AVENTICS Series 521 is a line of solenoid air-operated, mini-spool valves that are ideal for piloting pneumatic cylinders.

    Enquiry
  • AVENTICS ED05 Direct Acting Pressure Regulator

    The AVENTICS ED05 direct-acting pressure regulator ensures sensitive pressure control by combining digital control electronics with innovative proportional technology.

    Enquiry
  • AVENTICS™ Series 192 Solenoid Valves

    The AVENTICS Series 192 is a line of CNOMO pad mounted solenoid valves for piloting applications. Its compact size and low weight

    Enquiry
  • AVENTICS™ Series SPRA Electric Rod-Style Actuators

    The AVENTICS Series SPRA electric rod-style actuators are the ideal solution to perform fast and powerful linear movements.

    Enquiry
  • AVENTICS™ Series AR1 Compressed air reservoirs

    The AVENTICS Series AR1 compressed air reservoirs contain up to 90 litres and can be used up to 11 bar.

    Enquiry
  • E-Learnings on STAUFF Products

    After purchase, you will receive access to the STAUFF: University within 24 hours. You will then have access to the purchased e-learning there.

    Enquiry
  • E-Learnings on Basic Hydraulics Topics

    After purchase, you will receive access to the STAUFF: University within 24 hours. You will then have access to the purchased e-learning there.

    Enquiry
  • Metal Filler Breathers

    Allow permanent venting while protecting against contamination entering the system with BSP or NPT male thread for screwing in, push-to-connect or as a bayonet version with three-hole or six-hole connection as per DIN 24557-2.

    Enquiry
  • Plastic Filler Breathers

    Allows permanent venting while protecting against contamination entering the system with thread for screwing in, welding on or as clamping jaws, bayonet or flange version with six-hole connection as per DIN 24557-2.

    Enquiry
  • Level and Temperature Gauges

    Level and temperature gauges in different versions and nominal sizes for combined optical and optical/electrical fill level monitoring and temperature measuring in hydraulic tanks with a maximum preload pressure of 2 bar.

    Enquiry
  • Return-Line Filters (Filter Housings and Filter Elements)

    They are suitable for operating pressures up to 25 bar and are placed as working filters and the last element in the hydraulic circuit directly upstream or downstream of the hydraulic tank.

    Enquiry
  • Pressure Filters (Filter Housings and Filter Elements)

    Pressure Filters in the pressure line of hydraulic and lubrication systems with up to 420 bar operating pressure.

    Enquiry
  • Replacement Filter Elements

    Replacement filter elements for industrial liquids such as hydraulic oils and lubricating oils, fuels, water, chemicals, cutting fluids and other liquid media.

    Enquiry
  • Digital Pressure Gauges

    Digital pressure gauges are designed for digital measurement and display of pressure in hydraulic systems, especially for oils, lubricants and water.

    Enquiry
  • Pressure Test Kits with Analogue Pressure Gauges

    Different versions of these SMB pressure test kits are assembled into kits with up to 3 pressure gauges and other accessories according to customer requirements

    Enquiry
  • Pressure Gauges

    Multiple pressure ranges up to 1000 bar. Variety of different versions and diameters available.

    Enquiry
  • STAUFF Test 12 Couplings and Accessories

    Test couplings with poppet valve (SKK) and accessories from the STAUFF Test 12 series with connection thread S12.65×1.5

    Enquiry
  • Steam cleaner SGG 1

    The innovative SGG 1 steam cleaner (battery powered backpack unit) removes dried chewing gum from a variety of surfaces with a combination of steam and a biological cleaning agent.

    Enquiry
  • Steam vacuum cleaners SGV 8/5

    The easy-to-use SGV 8/5 combines the functions of a steam cleaner and a wet/dry vacuum cleaner. Excess water is removed immediately during steaming. With extra cleaning programmes and accessory

    Enquiry
  • Interior cleaning heads HKF 200 E 3X400V 50Hz ex

    Electrically powered, acid-, alkali- and solvent-resistant interior cleaning head HKF 200 E for optimum cleaning of medium to large containers.

    Enquiry
  • Interior cleaning heads HKF 50 P

    The ATEX-certified, pneumatically driven stainless steel HKF 50 P interior cleaning head cleans small and medium-sized tanks up to 1000 l.

    Enquiry
  • Universal Stain Remover RM 769, 500ml

    Universal Stain Remover RM 769 for all textile coverings, upholstery and hard surfaces – removes oil, tar, shoe polish, adhesive, etc., from solvent-resistant surfaces.

    Enquiry
  • SurfacePro Surface Cleaner CA 30 C eco!perform, 5l

    Universal, fast surface cleaning concentrate for floors and interior with streak-free drying – also for high-gloss surfaces. With EU eco label certification.

    Enquiry
  • Dry ice blaster IB 7/40 Classic

    Thanks to airflow optimisations, our Ice Blaster IB 7/40 impresses with excellent results during dry ice cleaning, even when working with low air pressures. Compact device.

    Enquiry
  • Dry ice blaster IB 7/40 Adv

    The Ice Blaster IB 7/40 Advanced has a jet gun with integrated remote control and also guarantees the best results with dry ice cleaning at low air pressures.

    Enquiry
  • Implements WRS 200

    Our WRS 200 is a mobile implement for municipal machines that is used particularly for the targeted control of weeds with hot water. Compact dimensions and low weight.

    Enquiry
  • Implement carriers MIC 26C Adv

    The slim and compact design makes our MIC 26 C Adv implement carrier perfect for applications on pavements and in parks.

    Enquiry
  • Ex Iundustrial vaccum Cleaners

    IVS 100/75 M Z22
    With 7.5 kW, the IVS 100/75 M Z22 super-class industrial vacuum features the most powerful side channel blower in our range.

    Enquiry
  • Industrial Vaccum cleaners for solids/dusts

    IVS 100/75 M
    Super-class range with dust class M certification: IVS 100/75 M with 7.5 kW side channel blower for very large quantities of dusts that are hazardous to health.

    Enquiry
  • HR 04 – 07 Series

    Capacity: 0.57 – 1.27 m³/min
    Pressure: 7 – 10 bar
    Motor Power: 4.0 – 7.5 kW

    Enquiry
  • HV 11 – 22 Series

    Capacity: 1.29 – 3.60 m³/min
    Pressure: 8 – 10 bar
    Motor Power: 11 – 22 kW

    Enquiry
  • HV 01 – 04 Series

    Capacity: 0.12 – 0.57 m³/min
    Pressure: 10 bar
    Motor Power: 1.1 – 4.0 kW

    Enquiry
  • Custom Engineering Systems

    we have the capacity to carry out complex projects for our customers with bespoke and custom requirements. Whatever details matter to you, CompAir air compressors, air treatment and nitrogen generation packages are designed to meet your needs exactly.

    Enquiry
  • Pneumatic Tools

    CompAir is a compressed air specialist company and among their products are quality pneumatic hammers, breakers, rock drills and moles.

    Enquiry
  • C200TS-24 – C270TS-9 TurboScrew

    CompAir TurboScrew compressors offer patented bi-turbo technology that provides best in class diesel efficiency whilst still offering clean performance in accordance with directive 97/68/EC.

    Enquiry
  • C20 – C30

    This series of towable compressors are equipped with new, powerful Yanmar engines which regulate the engine to offer optimal performance.

    Enquiry
  • C85-14 – C140-9

    Suited for heavy-duty applications such as civil engineering, restoration work, and road building, this range offers reliability, cost-saving,

    Enquiry
  • C10-12 – C14

    The smallest of our mobile air compressor range, this series offers a lightweight solution for any repair or installation jobs where compressed air is required

    Enquiry
  • C35-10 – C50

    This series is exceedingly quiet and features a low noise, water-cooled engine that offers successful performance for a range of on the go jobs.

    Enquiry
  • C55-14 – C76

    For versatile performance, this compact range can meet the requirements of a plethora of applications thanks to a wide pressure range of up to 14 bar.

    Enquiry
  • Compressed Air Dryers

    CompAir offers a full range of energy efficient and environmentally friendly dryers, such as refrigerant dryers, heatless and heated desiccant dryers…

    Enquiry
  • Reversible vibratory plates

    reversible vibratory plates deliver excellent compaction performance on the widest variety of sub-bases.

    Enquiry
  • 2-stroke Rammers

    WM80 engine specifically to withstand rugged rammer applications while exceeding current emission regulations

    Enquiry
  • External vibrators

    we offer a wide selection of powerful external vibrators with various speed and operating voltage versions.

    Enquiry
  • Frequency converters

    Depending on the model, you can use our frequency converters stationary or mobile. They are extremely durable, require minimal maintenance

    Enquiry
  • Walk-behind roller RD7

    The RD7 walk-behind dual-vibration roller delivers excellent performance in both soil and asphalt compaction – thanks to the optimally integrated frequency and two vibration stages.

    Enquiry
  • Electric Rammers

    Emission-free first
    They are easy to operate and start with a simple push of a button.

    Enquiry
  • Internal vibrators

    The IRFU high-frequency internal vibrator series are easy to use. They simply connect to the single-phase power supply and are ready to use.

    Enquiry
  • Showing 1–27 of 421 results